STATISTICA or STATISTICA Power Analysis Installation Instructions (version 6)STATISTICA Network License Installation Instructions (version 6)STATISTICA Concurrent Network License Installation Instructions (version 6)STATISTICA Single User Evaluation Installation Instructions (version 6)SEDAS Single User Installation Instructions (version 6)SEDAS Network Installation Instructions (version 6)SEWSS Single User Installation Instructions (version 6)SEWSS Network Installation Instructions (version 6)STATISTICA or STATISTICA Power Analysis Installation Instructions (version 5.5)STATISTICA Network License Installation Instructions (version 5.5)STATISTICA Concurrent Network System Administrator Installation Instructions (version 5.5)STATISTICA Concurrent Network User Installation Instructions (version 5.5)STATISTICA Neural Networks Installation Instructions (version 5.5)Users running Windows NT, 2000, or XP on their client machines must login with Administrator permissions to complete the client installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
If you have a previous version of STATISTICA already on your computer, please use Control Panel - Add/Remove Programs to un-install the old program. (Note that this method of un-installing STATISTICA will not affect (will not remove) any data files created with previous installations.) Once this is complete, please proceed with the following instructions for installation:
| StatSoft Home Page |
| Back to Top |
Q. When installing the server, I receive a message stating it was unable to create the licensing file. What does this indicate?
A. This indicates that you may not have write permissions for the selected folder for the server installation. Review the permissions and correct them as necessary.
Q. When installing the server, I receive a message stating that the option file StatOpts.xml could not be created. How is this resolved?
A. Once the installation fails, verify that you have proper permissions to the selected folder for the server installation. If full permissions are set for the folder and you still receive this error during your initial installation, you should manually delete the contents of the server installation directory. Now, restart the server installation process.
Q. When installing the server, I receive a message stating there was an error initializing the installer. The message states that this may be caused by having both network and workstation installs on the same computer. What do I do to advance in the installation?
A. You will need to remove the workstation installation before performing the server installation again. If you press the OK button on this dialog, the workstation installation will be removed. You will then be able to begin the server installation. If you press the Cancel button, the workstation installation will remain on the system, allowing you to perform the server installation from another workstation.
Running from the Server
Q. When I attempt to launch STATISTICA from the server, I receive a prompt for a date code. How do I resolve this?
A. It is not possible to run STATISTICA directly from the server installation. It is necessary to do a workstation installation, and to run STATISTICA from the workstation installation.
Workstation Installation
Q. When installing a workstation, I receive an error message stating that the installation program was unable to configure the workstation. What causes this?
A. This can be caused by a permission issue on the workstation. The workstation user must have full access to the application directory created on the workstation for installation of the workstation files. These permissions are needed in addition to the permissions required for the server file directories. After you confirm local permissions, you should be able to install STATISTICA on the workstation. If you are still unable to install, there may be corruption on the workstation hard drive preventing installation. You may also attempt to install STATISTICA to another directory on the workstation.
Q. Upon launching the workstation setup.exe and clicking "Next >" the following error message is raised: Unable to find the configuration file. How is this resolved?
Running on a Workstation
Q. When I attempt to launch STATISTICA from a workstation, I receive an error message stating that the program cannot find the configuration file. What causes this?
Q. When I attempt to launch STATISTICA from a workstation, I receive an error message stating that the network client was not properly installed. What should I do to resolve this?
Q. When I attempt to launch STATISTICA from a workstation, I receive a prompt for a date code. How do I resolve this?
Q. Upon launching STATISTICA the user is immediately confronted with the following error message: Unexpected error accessing concurrent licensing file. How is this resolved?
Q. When installing the server, I receive a message stating it was unable to create the licensing file. What does this indicate?
Q. When installing the server, I receive a message stating that the option file StatOpts.xml could not be created. How is this resolved?
Q. When installing the server, I receive a message stating there was an error initializing the installer. The message states that this may be caused by having both network and workstation installs on the same computer. What do I do to advance in the installation?
Running from the Server
Q. When I attempt to launch STATISTICA from the server, I receive a prompt for a date code. How do I resolve this?
Workstation Installation
Q. When installing a workstation, I receive an error message stating that the installation program was unable to configure the workstation. What causes this?
Q. Upon launching the workstation setup.exe and clicking "Next >" the following error message is raised: Unable to find the configuration file. How is this resolved?
Running on a Workstation
Q. When I attempt to launch STATISTICA from a workstation, I receive an error message stating that the program cannot find the configuration file. What causes this?
Q. When I attempt to launch STATISTICA from a workstation, I receive an error message stating that the network client was not properly installed. What should I do to resolve this?
Q. When I attempt to launch STATISTICA from a workstation, I receive a prompt for a date code. How do I resolve this?
Q. Upon launching STATISTICA the user is immediately confronted with the following error message: Unexpected error accessing concurrent licensing file. How is this resolved?
If you have a previous version of STATISTICA already on your computer, please use Control Panel - Add/Remove Programs to un-install the old program. (Note that this method of un-installing STATISTICA will not affect (will not remove) any data files created with previous installations.) Once this is complete, please proceed with the following instructions for installation:
If you choose to install to SQL Server, Oracle, or any DBMS other than Access, you must create a database on which to place the SEDAS schema. The user permissions for installing to this database must be such that the user can create tables, views, and indices, and be able to select, insert, update, and delete records in the tables and views.
If you have a previous version of SEDAS (or SENS) already on your computer, please use Control Panel - Add/Remove Programs to uninstall the old program. This will ensure that data files created with earlier versions of SEDAS (or SENS) will remain intact. Once this is complete, please proceed with the following instructions for installation.
If the database install process fails at any point, it is necessary to return the system to the state in which it was before the Database Setup began, i.e. no schema or data written or database connectivity information will be persistent unless the database installation process has completed successfully (see notes below).
If you choose to install to SQL Server, Oracle, or any DBMS other than Access, you must create a database on which to place the SEWSS schema. The user permissions for installing to this database must be such that the user can create tables, views, and indices, and be able to select, insert, update, and delete records in the tables and views.
If you have a previous version of SEWSS already on your computer, please use Control Panel - Add/Remove Programs to uninstall the old program. This will ensure that data files created with earlier versions of SEWSS will remain intact. Once this is complete, please proceed with the following instructions for installation.
If the database install process fails at any point, it is necessary to return the system to the state in which it was before the Database Setup began, i.e. no schema or data written or database connectivity information will be persistent unless the database installation process has completed successfully.
1. Ensure that no other programs are running.
Workstation Installation (Note: This should be run on the System Administrator's workstation. The User Installation Instructions should be used for all additional workstations once this has been completed.)
17. Ensure that no other applications are running.
Server installation. The installation program will recognize a network license CD key. It will prompt for the Network ID number.
Workstation installation. After successfully installing STATISTICA Neural Networks on your server, the next step is to perform workstation installations on all of the client machines licensed to access the program. Browse to the Clisetup subfolder of the folder to which STATISTICA Neural Networks was installed on the network server. Run Setup.exe found in that subfolder.
©Copyright StatSoft, Inc., 1984-2004.
A. Problem 1: For some reason or other, the Windows Security Permissions to the ...\Sdata folder on the Server (STATISTICA File Server) are restricted to the user who currently logged on to Windows (Windows logon used to perform the workstation install).
Fix: Grant explicit Windows Security Permissions (Read/Write or else Full Control) to the ...\Sdata folder on the Server for any and all Windows logons that are to be used for workstation installations. In practice it is often easier to simply select another Windows Logon (System Administrator) that already has explicit Security Permissions to the folder to perform the workstation installation/s.
Problem 2: A disparity exists between the path as expressed within the "xxnet" file on the File Server and the availability of said path on the workstation. The path may either be expressed as a UNC (ex. \\
Note: The path as apparent in the "xxnet" file is created directly from the path as it exists on the File Server at the time of the STATISTICA File Server installation. If a common drive letter mapping to the STATISTICA File Server is to be used on all workstations, it is recommended that the same mapping be made on the machine that is to become the File Server, BEFORE performing the STATISTICA File Server installation. In this way, the "xxnet" file will be automatically populated with the path expressed with the common drive letter and resource path.
Fix: Using Notepad (Start | Run -> Notepad), manually edit the path in the "xxnet" file to reflect a network resource location that is common to all users of STATISTICA.
A. This can be caused by either a lack of permissions for the server directory. Specifically, the workstation needs read and write access to the Statnet.lic file in the SDATA folder of the server installation.
A. Open the Windows control panel and double-click the Add/Remove Programs icon. Select STATISTICA to launch the STATISTICA Setup program. Selecting the Repair option will reinstall the program and should resolve this problem. If you still receive the message after performing the repair, you will need to Remove the program and then re-install the program from the server setup directory.
A. Open the Windows control panel and double-click the Add/Remove Programs icon. Select STATISTICA to launch the STATISTICA Setup program. Selecting the Repair option will reinstall the program and should resolve this problem. If you still receive the message after performing the repair, you will need to Remove the program and then re-install the program from the server setup directory.
A. Problem 1: This error occurs when the "..\Sdata\StatNet.lic" file is set with the "read-only" attribute. This is sometimes the case when this file or else the entire STATISTICA File Server has been restored from backup. The User may be unaware that a restore had taken place and only note that "it was working fine yesterday" but they now encounter this error.
Fix: Verify the file's properties by navigating (Windows Explorer) to the "...\Sdata" folder and right-clicking on the file. Remove the "read-only" attribute by clicking the appropriate check box.
Problem 2: This error also occurs when the user's Windows Logon does not explicitly allow them Security Permission to the file ("...\Sdata\StatNet.lic"). It is likely that the Windows Logon currently being used does not have the same Security Permissions as that of the Logon used to install the workstation. It may be that the user is simply logged on to Windows with a different user than they assume. This is likely the case if they claim they could log on to STATISTICA before but cannot now.
Fix: Ask the user to verify their logon (log out and log back into Windows again) and attempt once again to launch STATISTICA.
Fix Continued: It is possible that the Windows Logon does not have sufficient Security Permissions for the file. This may even be due to Security Permissions at either the network drive, Windows share or System folder levels. Verify the Windows Logon Security Permission by navigating (Windows Explorer) to the "...\Sdata" folder and right-clicking on the file, click the "Security" tab and note the User's identity or Domain group permissions. Identify the level at which the Logon is prevented from access and correct permissions by having a Windows Domain Administrator add the necessary permissions, Special Access (RW) "Read/Write" or Full Control (All).
StatSoft Home Page
Back to Top
STATISTICA Concurrent Network License Installation Instructions (version 6)
Click here to download instructions in .pdf format
Notes
1. The installation of the Concurrent network version entails two parts: a) A server installation, and b) Workstation installations on each of the client machines. The program will not function if the client installations are not completed.
2. Users running Windows NT, 2000, or XP on their client machines must login with Administrator permissions to complete the client installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
3. If you have a previous version of STATISTICA already on your computer, please use Control Panel - Add/Remove Programs to uninstall the old program so that data files created with earlier versions of STATISTICA will remain intact. Once this is complete, please proceed with the following instructions for installation.
Server Installation
1. Ensure that no other applications are running.
2. Insert the STATISTICA CD into the CD-ROM drive. The installation process should begin automatically. If the CD does not auto-start, browse the CD and double-click on Setup.exe.
3. The STATISTICA installation screen will appear. Click on Install STATISTICA.
4. The Welcome screen will appear. Click the Next button.
5. In the CD Key / Net ID dialog, enter the CD key and Net ID in the appropriate boxes. You will find the keys on a sticker on the back of the CD case, below the serial number. Click Next to continue.
6. In the Date Code dialog, enter the Date Code. You will find the code on a sticker on the back of the CD case. Click Next to continue.
7. In the License Key dialog, enter the License Key in the appropriate boxes. You will find the key on a sticker on the back of the CD case. Click Next to continue.
8. Read the software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
9. In the Choose Folder dialog, choose where you want to install the STATISTICA Concurrent Network server software by either typing in the path, or browsing through the directories. When you have chosen your installation path, click OK. If the specified destination folder does not exist, Setup will create it for you.
10. To install to the selected destination, click Next on the Choose Destination Location dialog.
11. In the Product Serial Number dialog, enter your Serial Number in the box. You will find the Serial Number on a sticker on the back of the CD case. Click Next to continue.
12. In the Select Components screen, you will be shown the components that you will be installing to the server. Note that the Multimedia files are movies and demonstrations of STATISTICA, which will be installed to the server, and can then be viewed from the any workstation. Click Next to continue.
13. In the Network Path - License File dialog, you will be prompted for the location to place the STATISTICA licensing configuration file. This is the licensing file that will keep track of how many workstations are in use. It must be shared, and all workstations must have full control (read/write/execute permissions) to this file. The relative path information must also be correct for all workstations.
14. To begin copying files to your machine, click Next.
15. After the files have been copied to your machine, you will be given the opportunity to install the STATISTICA License Administrator Tools.
NetAdmin is a tool for monitoring and changing STATISTICA licensing configuration for the network installation. As this program can disable a user's ability to execute STATISTICA, it is suggested that it be installed to a secure location on the network server with limited access.
The default location is within the STATISTICA installation directory which is accessible to all users of the STATISTICA System, and which may be acceptable for small installations.
16. You should then receive a message stating that the installation is complete. Click Finish to complete the installation process.
17. Version 6 example datasets are located within the installation directory, in Examples\Datasets.
Workstation Installation
1. Ensure that no other applications are running.
2. Locate the Setup subfolder of the folder in which the STATISTICA program files were installed on the server. Double-click the Setup.exe file located in the Setup subfolder.
3. The Welcome screen will appear. Click Next.
4. Read the software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
5. To install to the default destination, click Next on the Choose Destination Location dialog. To install to a different destination, click Browse, select another destination, and click Next.
6. In the User Information dialog, enter the user name and the company name in the appropriate boxes.
7. Select either Typical Setup or Custom Setup, then click Next. Typical Setup will install STATISTICA with the most common options; this is recommended for most users. If you choose Typical Setup, you will be given the option to either install the Multimedia Overviews files to your hard drive, or simply view them from the installation directory. Custom Setup will allow you to choose the options that you want to install.
8. If you are satisfied with all of your choices, click Next on the Start Copying Files dialog.
9. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (click Yes).
10. If the workstation's system files need to be updated, you must restart your computer to finish the installation process. Click Finish on the Setup Complete dialog.
11. STATISTICA requires Microsoft Data Access Components version 2.1. If the workstation did not have MDAC 2.1 (or higher) installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart your computer once more.
12. After the installation process has been completed, you will see the STATISTICA program group window, which will contain the appropriate STATISTICA application shortcuts.
Un-installing
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the folder containing the program files and all of its subfolders.
Repairing
To repair your existing installation of STATISTICA, run the Add/Remove Program option found in the Windows Control Panel. Then, choose Repair, and click Next. This will reinitialize all of your user information and Date Code information, and reinstall the files.
Network Administrator Functions
Refresh: Because the workstation window may change as users install or uninstall you should periodically press the Refresh button to update the window to reflect the current status of the workstations.
Delete: As users log on to STATISTICA, the workstation is appropriately added or removed from the workstation window. If a workstation loses its network connection unexpectedly, the Network Administrator may continue to show it as an active session. In order to free the license, you may highlight the affected workstation and press the delete key.
Date Code: If you receive a new Date Code from StatSoft, you may administer the new date code by pressing the Date Code button. This allows you to easily update the Date Code without the need to update each workstation installation, or reinstall the server. After entering the new Date Code, the new expiration date will be displayed in the license information section.
License Key: If you purchase additional workstation licenses, you will receive a new License Key from StatSoft. You may administer the new License Key by pressing the License Key button. Again, this allows you to easily update your installation without the need to update each workstation, or reinstall the server. After entering the new License Key, the license information section will be updated.
Frequently Asked Questions
Server Installation
A. This indicates that you may not have write permissions for the selected folder for the server installation. Review the permissions and correct them as necessary.
A. Once the installation fails, verify that you have proper permissions to the selected folder for the server installation. If full permissions are set for the folder and you still receive this error during your initial installation, you should manually delete the contents of the server installation directory. Now, restart the server installation process.
A. You will need to remove the workstation installation before performing the server installation again. If you press the OK button on this dialog, the workstation installation will be removed. You will then be able to begin the server installation. If you press the Cancel button, the workstation installation will remain on the system, allowing you to perform the server installation from another workstation.
A. It is not possible to run STATISTICA directly from the server installation. It is necessary to do a workstation installation, and to run STATISTICA from the workstation installation.
A. This can be caused by a permission issue on the workstation. The workstation user must have full access to the application directory created on the workstation for installation of the workstation files. These permissions are needed in addition to the permissions required for the server file directories. After you confirm local permissions, you should be able to install STATISTICA on the workstation. If you are still unable to install, there may be corruption on the workstation hard drive preventing installation. You may also attempt to install STATISTICA to another directory on the workstation.
A. Problem 1: For some reason or other, the Windows Security Permissions to the ...\Sdata folder on the Server (STATISTICA File Server) are restricted to the user who currently logged on to Windows (Windows logon used to perform the workstation install).
Fix: Grant explicit Windows Security Permissions (Read/Write or else Full Control) to the ...\Sdata folder on the Server for any and all Windows logons that are to be used for workstation installations. In practice it is often easier to simply select another Windows Logon (System Administrator) that already has explicit Security Permissions to the folder to perform the workstation installation/s.
Problem 2: A disparity exists between the path as expressed within the "xxnet" file on the File Server and the availability of said path on the workstation. The path may either be expressed as a UNC (ex. \\
Note: The path as apparent in the "xxnet" file is created directly from the path as it exists on the File Server at the time of the STATISTICA File Server installation. If a common drive letter mapping to the STATISTICA File Server is to be used on all workstations, it is recommended that the same mapping be made on the machine that is to become the File Server, BEFORE performing the STATISTICA File Server installation. In this way, the "xxnet" file will be automatically populated with the path expressed with the common drive letter and resource path.
Fix: Using Notepad (Start | Run -> Notepad), manually edit the path in the "xxnet" file to reflect a network resource location that is common to all users of STATISTICA.
A. This can be caused by either a lack of permissions for the server directory. Specifically, the workstation needs read and write access to the Statnet.lic file in the SDATA folder of the server installation.
A. Open the Windows control panel and double-click the Add/Remove Programs icon. Select STATISTICA to launch the STATISTICA Setup program. Selecting the Repair option will reinstall the program and should resolve this problem. If you still receive the message after performing the repair, you will need to Remove the program and then re-install the program from the server setup directory.
A. Open the Windows control panel and double-click the Add/Remove Programs icon. Select STATISTICA to launch the STATISTICA Setup program. Selecting the Repair option will reinstall the program and should resolve this problem. If you still receive the message after performing the repair, you will need to Remove the program and then re-install the program from the server setup directory.
A. Problem 1: This error occurs when the "..\Sdata\StatNet.lic" file is set with the "read-only" attribute. This is sometimes the case when this file or else the entire STATISTICA File Server has been restored from backup. The User may be unaware that a restore had taken place and only note that "it was working fine yesterday" but they now encounter this error.
Fix: Verify the file's properties by navigating (Windows Explorer) to the "...\Sdata" folder and right-clicking on the file. Remove the "read-only" attribute by clicking the appropriate check box.
Problem 2: This error also occurs when the user's Windows Logon does not explicitly allow them Security Permission to the file ("...\Sdata\StatNet.lic"). It is likely that the Windows Logon currently being used does not have the same Security Permissions as that of the Logon used to install the workstation. It may be that the user is simply logged on to Windows with a different user than they assume. This is likely the case if they claim they could log on to STATISTICA before but cannot now.
Fix: Ask the user to verify their logon (log out and log back into Windows again) and attempt once again to launch STATISTICA.
Fix Continued: It is possible that the Windows Logon does not have sufficient Security Permissions for the file. This may even be due to Security Permissions at either the network drive, Windows share or System folder levels. Verify the Windows Logon Security Permission by navigating (Windows Explorer) to the "...\Sdata" folder and right-clicking on the file, click the "Security" tab and note the User's identity or Domain group permissions. Identify the level at which the Logon is prevented from access and correct permissions by having a Windows Domain Administrator add the necessary permissions, Special Access (RW) "Read/Write" or Full Control (All).
StatSoft Home Page
Back to Top
STATISTICA Single User Evaluation Installation Instructions (version 6)
Click here to download instructions in .pdf format
Notes
Users running Windows NT, 2000, or XP on their client machines must login with Administrator permissions to complete the client installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
Server Installation
1. Ensure that no other applications are running.
2. Insert the STATISTICA CD into the CD-ROM drive. The installation process should begin automatically. If the CD does not auto-start, browse the CD and double-click on Setup.exe.
3. The STATISTICA installation screen will appear. Click on Install STATISTICA.
4. The Welcome screen will appear. Click the Next button.
5. In the CD Key / Net ID dialog, enter the CD key and Net ID (if applicable) in the appropriate boxes. You will find the key on a sticker on the back of the CD case, below the serial number. Click Next to continue.
6. In the Date Code dialog, enter the 10-digit Date Code in the appropriate box. You will find the code on the sticker on the back of the CD case, below the CD Key. Click Next to continue.
7. Read the software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
8. To install to the default destination, click Next on the Choose Destination Location dialog. If you wish to install to a different destination, click Browse and select another destination, and then click Next. If the specified destination folder does not exist, Setup will create it automatically.
9. In the User Information dialog, enter the requested information in the appropriate boxes. The serial number is located on a sticker on the back of the CD case. This information is required for setup to continue. Click Next to continue.
10. Select either Typical Setup or Custom Setup, then click Next. Typical Setup will install STATISTICA with the most common options; this is recommended for most users. Custom Setup will allow you to choose the options that you want to install; this is recommended for advanced users.
11. If you chose Typical Setup, you will be asked if you want to install the Multimedia files to your hard drive. These are movies that provide overviews of various aspects of the STATISTICA system. We recommend that you install them if you have sufficient disk space but they can also be viewed from the CD at any time. If you chose Custom Setup, you will be given the opportunity to install the Multimedia files on the Select Components screen.
12. To begin copying files to your machine, click Next.
13. You should receive a message stating that the installation is complete. You may be asked if you wish to reboot now or reboot later, depending on the components that were previously installed on your machine. If you are asked, it will be necessary to reboot before you run STATISTICA. Click Finish to complete the installation process.
14. Version 6 example datasets are located within the STATISTICA directory: if you accepted the default installation path, they will reside in the following directory:
C:\Program Files\StatSoft\STATISTICA 6\Examples\Datasets.
Un-installing
In case you need to un-install STATISTICA (for example, in order to install it on another computer), follow these steps:
1. Ensure that no other applications are running.
2. Choose Control Panel - Add/Remove Programs to un-install STATISTICA.
3. The Welcome screen will appear. Select Remove, and click the Next button.
4. A confirmation screen will appear asking if you want to completely remove the application and all of its components. Click the OK button.
5. The Maintenance Complete screen will appear. Click the Finish button.
StatSoft Home Page
Back to Top
SEDAS Single User Installation Instructions (version 6)
Click here to download instructions in .pdf format
Notes
Users running Windows NT, 2000, or XP on their machines must login with Administrator permissions to complete the installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
INSTALLATION
1. Ensure that no other applications are running.
2. Insert the STATISTICA CD in the CD-ROM drive. The installation process should begin automatically. If the CD does not auto-start, browse the CD and double-click on Setup.exe.
3. The STATISTICA installation screen will appear. Click on Install STATISTICA.
4. The welcome screen will appear. Click the Next button.
5. In the CD Key / Net ID dialog, enter the CD key in the appropriate boxes. You will find the key on a sticker on the back of the CD case, below the serial number. Click Next to continue.
6. In the Date Code dialog, enter the Date Code. You will find the code on a sticker on the back of the CD case. Click Next to continue.
7. In the License Key dialog, enter the License Key in the appropriate boxes. You will find the key on a sticker on the back of the CD case. Click Next to continue.
8. Read the StatSoft software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
9. To install to the default destination, click Next on the Choose Destination Location dialog. If you wish to install to a different destination, click Browse and select another destination, and then click Next. If the specified destination folder does not exist, Setup will create it automatically.
10. In the User Information dialog, enter the requested information in the appropriate boxes. The serial number is located on a sticker on the back of the CD case. Click Next to continue.
11. Select either Typical Setup or Custom Setup, then click Next. Typical Setup will install SEDAS with the most common options, and will automatically set up a database; this is recommended for most users. If you choose Typical Setup, you will be given the option to either install the Multimedia Overviews files to your hard drive, or simply view them from the installation directory. Custom Setup is recommended for advanced users. It will allow you to choose the components you wish to install and redefine where to access the STATISTICA licensing configuration file.
12. If you are satisfied with all of your choices, click Next on the Start Copying Files dialog.
13. Your system files will be updated and program files will be installed. If you receive any Version Conflict messages it is recommended that you keep your existing file (click Yes).
14. If the computer's system files need to be updated, you must restart your computer to finish the installation process. Click Finish on the Setup Complete dialog.
15. SEDAS requires Microsoft Data Access Components (MDAC) version 2.1. If the workstation does not have MDAC 2.1 (or higher) installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart you computer once more.
16. Next the Database Setup Utility will appear. If you do not have an existing database, it is necessary to run this utility.
17. If you choose to run the Database Setup Utility, it will first prompt you to choose the type of installation: either create a new SEDAS database, or use an existing SEDAS database.
18. Select the Database Management System of your choice.
19. Click Finish on the Setup Complete dialog.
Create New: If you choose to install to Access Database, in the Select Destination Folder Dialog, specify the path where this database will be installed. To install to the default location, click Next. To install to a different destination, click Browse, select another destination, and click Next.
Setup will then create the database, Sedas.mdb, in the specified location using the SEDAS schema. If a previous Sedas.mdb existed in the specified location, setup will create a backup of this database.
Use Existing: If you choose to install to Access Database, in the Select Destination Folder Dialog specify the path where this database is located. Click Browse to select the path to the existing database. The path will be initially set to the assumed default. Once the appropriate path is defined, click Next.
Create New: If you choose to install to SQL Server Database, in the Data Link Properties Dialog - Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEDAS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to SQL Server Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog - Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEDAS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Client version 8.01 or less
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
Client version 8.1 or greater
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
20. After the installation process has been completed, you will see the STATISTICA program group window, which will contain the appropriate SEDAS application shortcuts.
21. To start using SEDAS, double-click the SEDAS shortcut, and type in the default login name "Admin," and password "abcdef." You will then be taken to the Component Manager window.
Uninstalling
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the folder containing the program files and all of its subfolders.
Repairing
To repair your existing installation of STATISTICA, run the Add/Remove Program option found in the Windows Control Panel. Then, choose Repair, and click Next. This will reinitialize all of your user information and Date Code information, and reinstall the files.
StatSoft Home Page
Back to Top
SEDAS Network Installation Instructions (version 6)
Click here to download instructions in .pdf format
Notes
1. The installation of SEDAS entails three parts: a) A server installation, b) an optional database installation, and c) workstation installations on each of the client machines. The program will not function if the client installations are not completed.
2. Users running Windows NT, 2000, or XP on their client machines must login with Administrator permissions to complete the client installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
3. If you have a previous version of SEDAS (or SENS) already on your computer, please use Control Panel - Add/Remove Programs to uninstall the old program. This will ensure that data files created with earlier versions of SEDAS (or SENS) will remain intact. Once this is complete, please proceed with the following instructions for installation.
Server Installation
1. Before beginning the Installation process, create a common mapped drive to the folder where you will be installing the server files.
Note: The mapped drive letter must be available to all subsequent workstations where SEDAS will be installed. These workstations must use the same drive letter mapped to the same location and level as the mapped drive for the server.
2. Ensure that no other applications are running.
3. Insert the STATISTICA CD in the CD-ROM drive. The installation process should begin
automatically. If the CD does not auto-start, browse the CD and double-click on Setup.exe.
4. The STATISTICA installation screen will appear. Click on Install STATISTICA.
5. The Welcome screen will appear. Click the Next button.
6. In the CD Key / Net ID dialog, enter the CD key and Net ID in the appropriate boxes. You will find the keys on a sticker on the back of the CD case, below the serial number. Click Next to continue.
7. In the Date Code dialog, enter the Date Code. You will find the code on a sticker on the back of the CD case. Click Next to continue.
8. In the License Key dialog, enter the License Key in the appropriate boxes. You will find the key on a sticker on the back of the CD case. Click Next to continue.
9. Read the StatSoft software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
10. In the choose folder dialog, choose the mapped drive you created at the beginning of the installation by either typing in the drive letter, or selecting it from the tree view. When you have chosen your installation drive, click OK.
11. To install to the selected destination, click Next on the Choose Destination Location dialog.
12. In the Product Serial Number dialog, enter your Serial Number in the box. You will find the Serial Number on a sticker on the back of the CD case. Click Next to continue.
13. In the Select Components screen, you will be shown the components that you will be installing to the server. Note that the Multimedia files are movies and demonstrations of STATISTICA, which will be installed to the server, and can then be viewed from any workstation. Click Next to continue.
14. To begin copying files to your machine, click Next.
15. After the files have been copied to your machine, you should then receive a message stating that the installation is complete. Click Finish to complete the server installation process.
Database Setup
Note: If you choose to install to SQL Server, Oracle, or any DBMS other than Access, you must create a database on which to place the SEDAS schema. The user permissions for installing to this database must be such that the user can create tables, views, and indices, and be able to select, insert, update, and delete records in the tables and views.
1. Ensure that no other programs are running.
2. Locate the Database Setup folder by selecting the drive letter where the Server files were installed.
3. Double-click the Setup.exe file located in the Database Setup folder.
4. The Database Setup screen will appear. It will first prompt you to choose the type of installation: either create a new SEDAS database, or use an existing SEDAS database.
5. Select the Database Management System of your choice.
6. You should then receive a message stating that the installation is complete. Click Finish to complete the database installation process.
Create New: If you choose to install to Access Database, in the Select Destination Folder Dialog, specify the path where this database will be installed. To install to the default location, click Next. To install to a different destination, click Browse, select another destination, and click Next.
Setup will then create the database, Sedas.mdb, in the specified location using the SEDAS schema. If a previous Sedas.mdb existed in the specified location, setup will create a backup of this database.
Use Existing: If you choose to install to Access Database, in the Select Destination Folder Dialog specify the path where this database is located. Click Browse to select the path to the existing database. The path will be initially set to the assumed default. Once the appropriate path is defined, click Next.
Create New: If you choose to install to SQL Server Database, in the Data Link Properties Dialog - Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEDAS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to SQL Server Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog - Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEDAS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Client version 8.01 or less
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
Client version 8.1 or greater
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again. Workstation Installation
1. Ensure that no other applications are running.
2. Before beginning the Installation process for the workstation, create a common mapped drive to the location where the server files were installed.
Note: The mapped drive on the workstation must be the same drive letter mapped to the same location and level as the mapped drive for the server.
3. Using the mapped drive letter, locate the Setup subfolder. Double-click the Setup.exe file located in the Setup subfolder.
4. The welcome screen will appear. Click Next.
5. Read the StatSoft software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
6. To install to the default destination, click Next on the Select Destination Folder dialog. To install to a different destination, click Browse, select another destination, and click Next.
7. In the User Information dialog, enter the requested information in the appropriate boxes. Click Next to continue.
8. Select either Typical Setup or Custom Setup, then click Next. Typical Setup will install SEDAS with the most common options; this is recommended for most users. If you choose Typical Setup, you will be given the option to either install the Multimedia Overviews files to your hard drive, or simply view them from the installation directory. Custom Setup will allow you to choose the components you wish to install and will allow the user to redefine where to access the STATISTICA licensing configuration file.
9. If you are satisfied with all of your choices, click Next on the Start Copying Files dialog.
10. Your system files will be updated and program files will be installed. If you receive any Version Conflict messages it is recommended that you keep your existing file (click Yes).
11. If the workstation's system files need to be updated, you must restart your computer to finish the installation process. Click Finish on the Setup Complete dialog.
12. SEDAS requires Microsoft Data Access Components (MDAC) version 2.1. If the workstation did not have MDAC 2.1 (or higher) installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart you computer once more.
13. If you chose to do a Custom Setup in step 8, you will be prompted for the SEDAS data source file. This file, which is created by the Database Setup, contains the necessary configuration information to create an ODBC connection to the SEDAS database. The dialog defaults to the setup path. Click Next to continue and create the ODBC connection to the SEDAS database.
14. After the installation process has been completed, you will see the STATISTICA program group window, which will contain the appropriate SEDAS application shortcuts.
15. To start using SEDAS, double-click the SEDAS shortcut, and type in the default login name "Admin," and password "abcdef." You will then be taken to the Component Manager window.
StatSoft Home Page
Back to Top
SEWSS Single User Installation Instructions (version 6)
Click here to download instructions in .pdf format
Notes
Users running Windows NT, 2000, or XP on their machines must login with Administrator permissions to complete the installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
INSTALLATION
1. Ensure that no other applications are running.
2. Insert the STATISTICA CD in the CD-ROM drive. The installation process should begin automatically. If the CD does not auto-start, browse the CD and double-click on Setup.exe.
3. The STATISTICA installation screen will appear. Click on Install STATISTICA.
4. The welcome screen will appear. Click the Next button.
5. In the CD Key / Net ID dialog, enter the CD key in the appropriate boxes. You will find the key on a sticker on the back of the CD case, below the serial number. Click Next to continue.
6. In the Date Code dialog, enter the Date Code. You will find the code on a sticker on the back of the CD case. Click Next to continue.
7. In the License Key dialog, enter the License Key in the appropriate boxes. You will find the key on a sticker on the back of the CD case. Click Next to continue.
8. Read the StatSoft software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
9. To install to the default destination, click Next on the Choose Destination Location dialog. If you wish to install to a different destination, click Browse and select another destination, and then click Next. If the specified destination folder does not exist, Setup will create it automatically.
10. In the User Information dialog, enter the requested information in the appropriate boxes. The serial number is located on a sticker on the back of the CD case. Click Next to continue.
11. Select either Typical Setup or Custom Setup, then click Next. Typical Setup will install SEWSS with the most common options, and will automatically set up a database; this is recommended for most users. If you choose Typical Setup, you will be given the option to either install the Multimedia Overviews files to your hard drive, or simply view them from the installation directory. Custom Setup will allow you to choose the components you wish to install; this is recommended for advanced users.
12. You will then be prompted to choose which type of shortcuts you would like to have created. If Operator/General Use is selected (recommended), Setup will create those shortcuts that are necessary for the general use of SEWSS. If Admin/Engineer is selected, Setup will create administrative tools (i.e. Enterprise Tools).
13. If you are satisfied with all of your choices, click Next on the Start Copying Files dialog.
14. Your system files will be updated and program files will be installed. If you receive any Version Conflict messages it is recommended that you keep your existing file (click Yes).
15. If the computer's system files need to be updated, you must restart your computer to finish the installation process. Click Finish on the Setup Complete dialog.
16. SEWSS requires Microsoft Data Access Components (MDAC) version 2.1. If the workstation does not have MDAC 2.1 (or higher) installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart you computer once more.
17. Next the Database Setup Utility will appear. If you do not have an existing database, it is necessary to run this utility.
18. If you choose to run the Database Setup Utility, it will first prompt you to choose the type of installation: either create a new SEWSS database, or use an existing SEWSS database.
19. Select the Database Management System of your choice.
20. Click Finish on the Setup Complete dialog.
Create New: If you choose to install to Access Database, in the Destination Folder Dialog, specify the path where this database will be installed. To install to the default location, click Next. To install to a different destination, click Browse, select another destination, and click Next.
Setup will then create the database, Sewss.mdb, in the specified location using the SEWSS schema. If a previous Sewss.mdb existed in the specified location, setup will create a backup of this database.
Use Existing: If you choose to install to Access Database, in the Destination Folder Dialog specify the path where this database is located. Click Browse to select the path to the existing database. The path will be initially set to the assumed default. Once the appropriate path is defined, click Next.
Create New: If you choose to install to SQL Server Database, in the Data Link Properties Dialog - Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEWSS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to SQL Server Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog - Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEWSS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Client version 8.01 or less
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
Client version 8.1 or greater
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
21. After the installation process has been completed, you will see the STATISTICA program group window, which will contain the appropriate SEWSS application shortcuts.
22. To start using SEWSS, double-click the SEWSS shortcut, and type in the default login name "Admin," and password "abcdef." You will then be taken to the Component Manager window.
Uninstalling
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the folder containing the program files and all of its subfolders.
Repairing
To repair your existing installation of STATISTICA, run the Add/Remove Program option found in the Windows Control Panel. Then, choose Repair, and click Next. This will reinitialize all of your user information and Date Code information, and reinstall the files.
StatSoft Home Page
Back to Top
SEWSS Network Installation Instructions (version 6)
Click here to download instructions in .pdf format
Notes
1. The installation of SEWSS entails three parts: a) A server installation, b) an optional database installation, and c) workstation installations on each of the client machines. The program will not function if the client installations are not completed.
2. Users running Windows NT, 2000, or XP on their client machines must login with Administrator permissions to complete the client installation. The installation makes necessary changes to the system. If the user is prompted to reboot during the installation, he/she must login with Administrator permissions after rebooting to successfully complete the installation.
3. If you have a previous version of SEWSS already on your computer, please use Control Panel - Add/Remove Programs to uninstall the old program. This will ensure that data files created with earlier versions of SEWSS will remain intact. Once this is complete, please proceed with the following instructions for installation.
Server Installation
1. Before beginning the Installation process, you may need to create a common mapped drive to the folder where you will be installing the server files. This is required for an Access database installation. It is optional for SQL and Oracle, but will create a common repository for the example files.
Note: The mapped drive letter must be available to all subsequent workstations where SEWSS will be installed. These workstations must use the same drive letter mapped to the same location and level as the mapped drive for the server.
2. Ensure that no other applications are running.
3. Insert the STATISTICA CD in the CD-ROM drive. The installation process should begin
automatically. If the CD does not auto-start browse the CD and double-click on Setup.exe.
4. The STATISTICA installation screen will appear. Click on Install STATISTICA.
5. The Welcome screen will appear. Click the Next button.
6. In the CD Key / Net ID dialog, enter the CD key and Net ID in the appropriate boxes. You will find the keys on a sticker on the back of the CD case, below the serial number. Click Next to continue.
7. In the Date Code dialog, enter the Date Code. You will find the code on a sticker on the back of the CD case. Click Next to continue.
8. In the License Key dialog, enter the License Key in the appropriate boxes. You will find the key on a sticker on the back of the CD case. Click Next to continue.
9. Read the StatSoft software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
10. In the choose folder dialog, choose the mapped drive you created at the beginning of the installation by either typing in the drive letter, or selecting it from the tree view. When you have chosen your installation drive, click OK.
11. To install to the selected destination, click Next on the Choose Destination Location dialog.
12. In the Product Serial Number dialog, enter your Serial Number in the box. You will find the Serial Number on a sticker on the back of the CD case. Click Next to continue.
13. In the Select Components screen, you will be shown the components that you will be installing to the server. Note that the Multimedia files are movies and demonstrations of STATISTICA, which will be installed to the server, and can then be viewed from any workstation. Click Next to continue.
14. To begin copying files to your machine, click Next.
15. After the files have been copied to your machine, you should then receive a message stating that the installation is complete. Click Finish to complete the server installation process.
Database Setup
Note: If you choose to install to SQL Server, Oracle, or any DBMS other than Access, you must create a database on which to place the SEWSS schema. The user permissions for installing to this database must be such that the user can create tables, views, and indices, and be able to select, insert, update, and delete records in the tables and views.
2. Locate the Database Setup folder by selecting the drive letter where the Server files were installed.
3. Double-click the Setup.exe file located in the Database Setup folder.
4. The Database Setup screen will appear.
5. Select the Database Management System of your choice.
6. You should then receive a message stating that the installation is complete. Click Finish to complete the database installation process.
Create New: If you choose to install to Access Database, in the Select Destination Folder Dialog, specify the path where this database will be installed. To install to the default location, click Next. To install to a different destination, click Browse, select another destination, and click Next.
Setup will then create the database, Sewss.mdb, in the specified location using the SEWSS schema. If a previous Sewss.mdb existed in the specified location, setup will create a backup of this database.
Use Existing: If you choose to install to Access Database, in the Select Destination Folder Dialog specify the path where this database is located. Click Browse to select the path to the existing database. The path will be initially set to the assumed default. Once the appropriate path is defined, click Next.
Create New: If you choose to install to SQL Server Database, in the Data Link Properties Dialog - Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEWSS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to SQL Server Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider for SQL Server, and click Next.
In the Data Link Properties Dialog - Connection tab, enter or select the server name where the SQL Server Database is located, enter the information required to gain access to the server, and select the database on the server where the SEWSS schema will be applied. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Client version 8.01 or less
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
Client version 8.1 or greater
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Microsoft OLE DB Provider Oracle, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the server where the Oracle Database is located and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Create New: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again.
Use Existing: If you choose to install to Oracle Database, in the Data Link Properties Dialog, on the Provider tab, select the Oracle Provider for OLE DB, and click Next.
In the Data Link Properties Dialog, on the Connection tab, enter the name of the Oracle Database service and enter the information required to gain access to the database. Click Test Connection to ensure that the connection information is correct. If the test connection is successful, click OK to apply the connection information. If the test is unsuccessful, verify that the connection information is correct and try again. Workstation Installation
1. Ensure that no other applications are running.
2. Before beginning the Installation process for the workstation, create a common mapped drive to the location where the server files were installed.
Note: The mapped drive on the workstation must be the same drive letter mapped to the same location and level as the mapped drive for the server.
3. Using the mapped drive letter, locate the Setup subfolder. Double-click the Setup.exe file located in the Setup subfolder.
4. The welcome screen will appear. Click Next.
5. Read the StatSoft software license agreement, and then click Yes if you agree with the terms and wish to continue the installation process.
6. To install to the default destination, click Next on the Select Destination Folder dialog. To install to a different destination, click Browse, select another destination, and click Next.
7. In the User Information dialog, enter the requested information in the appropriate boxes. Click Next to continue.
8. Select either Typical Setup or Custom Setup, then click Next. Typical Setup will install SEWSS with the most common options; this is recommended for most users. If you choose Typical Setup, you will be given the option to either install the Multimedia Overviews files to your hard drive, or view them from the installation directory. Custom Setup will allow you to choose the components you wish to install; this is recommended for advanced users.
9. Select either an Operator/General Use installation or an Admin/Engineer installation and click Next. An Operator/General Use installation will only create shortcuts to SEWSS and necessary support applications installed to the workstation. An Admin/Engineer installation will create shortcuts to applications installed to the workstation and to the Enterprise Tools located on the server.
10. In the Station Name dialog enter the Station Name (Optional). If you choose to enter a Station Name, the SEWSS shortcut on the workstation will be modified to automatically log in using the Station Name.
Note: If you choose to enter a station name, it must be setup by the Administrator using the Station Editor, prior to logging in to SEWSS. If it is not, you will receive an Invalid Station Name message when you try to log in to SEWSS.
11. If you are satisfied with all of your choices, click Next on the Start Copying Files dialog.
12. Your system files will be updated and program files will be installed. If you receive any Version Conflict messages it is recommended that you keep your existing file (click Yes).
13. If the workstation's system files need to be updated, you must restart your computer to finish the installation process. Click Finish on the Setup Complete dialog.
14. SEWSS requires Microsoft Data Access Components (MDAC) version 2.1. If the workstation does not have MDAC 2.1 (or higher) installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart you computer once more.
15. If you chose to do a Custom Setup in step 8, you will be prompted for the SEWSS data source file. This file, which is created by the Database Setup, contains the necessary configuration information to create an ODBC connection to the SEWSS database. The dialog defaults to the setup path. Click Next to continue and create the ODBC connection to the SEWSS database.
16. After the installation process has been completed, you will see the STATISTICA program group window, which will contain the appropriate SEWSS application shortcuts.
17. To start using SEWSS, double-click the SEWSS shortcut, and type in the default login name "Admin," and password "abcdef." You will then be taken to the Component Manager window.
Uninstalling
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the folder containing the program files and all of its subfolders.
Repairing
To repair your existing installation of STATISTICA, run the Add/Remove Program option found in the Windows Control Panel. Then, choose Repair, and click Next. This will reinitialize all of your user information and Date Code information, and reinstall the files.
StatSoft Home Page
Back to Top
STATISTICA or STATISTICA Power Analysis Installation Instructions (version 5.5)
Installing
1. Ensure that no other applications are running.
2. Put the STATISTICA CD in the local drive (or shared drive). It should autorun the CD when you close the drive. If it does not autorun the CD, then go to the Windows Explorer and find the CD drive (e.g., STATISTICA (D:)). Find setup.exe and double click on it.
3. The STATISTICA installation screen will appear. To begin installing, select Install STATISTICA.
4. The Welcome screen will appear. Press Next.
5. Enter the CD Key. You will find the key on a sticker on the back of your CD case, below the serial number.
6. Read the software license agreement, and then press Yes if you agree with the terms and wish to continue the installation process.
7. To install to the default destination, click Next on the Select Destination Folder dialog. If you wish to install to a different destination, click Browse and select another destination, and then press Next.
8. Enter your Name, the Company name for whom you work, and the product Serial number in the User Information dialog. You will find the serial number on a sticker on the back of your CD case.
9. Select the Components you would like to install in the Select Components dialog. You may deselect those items you do not wish to install at this time.
10. Select the option to create shortcuts in the Confirm Shortcuts dialog, and then press Next.
11. If you wish to change the program folder name, enter a new name in the Program Folders edit box. Otherwise, press Next on the Select Program Folder dialog.
12. If you are satisfied with all of your choices, press Next on the Start Copying Files dialog.
13. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (press Yes).
14. To complete the setup process, press Finish on the Setup Complete dialog.
15. You will see the STATISTICA program group window that will consist of STATISTICA Help, and the appropriate STATISTICA application shortcuts.
Un-installing
To completely remove STATISTICA from your computer, run the Add/Remove Program option found in the Windows Control Panel.
StatSoft Home Page
Back to Top
STATISTICA
Network Installation Instructions (version 5.5)
Installing: Server
1. Ensure that no other applications are running.
2. Put the STATISTICA CD in the local drive (or shared drive). It should autorun the CD when you close the drive. If it does not autorun the CD, then go to the Windows Explorer and find the CD drive (e.g., STATISTICA (D:)). Find Setup.exe and double click on it.
3. The STATISTICA installation screen will appear. To begin installing, select Install STATISTICA.
4. The Welcome screen will appear. Press Next.
5. Enter the CD Key. You will find the key on a sticker on the back of your CD case, below the serial number.
6. Enter the 5-digit Net ID (Network Identification Number). You will find the ID on a sticker on the back of your CD case, below the CD key.
7. Specify the installation type you prefer. Select Network Install if you would like the program to reside on the server. With this type of installation, you will need to perform the workstation installation (described in the Installing: Workstation section) on each workstation that will need access to the program. Select Single User Install if you would like the program to reside on individual workstations. If you select Single User Install, follow steps 20 - 30 in the workstation installation section.
8. Read the software license agreement, and then press Yes if you agree with the terms and wish to continue the installation process.
9. Select or create the destination folder in the Browse the Folder dialog, and then press OK.
10. To install to the specified destination, click Next on the Select Destination Folder dialog. If you wish to install to a different destination, click Browse and select another destination, and then press Next.
11. Enter your Name, the Company name for whom you work, and the product Serial number in the User Information dialog. You will find the serial number on a sticker on the back of your CD case.
12. Select the Components you would like to install in the Select Components dialog. You may deselect those items you do not wish to install at this time.
13. If you are satisfied with all of your choices, press Next on the Start Copying Files dialog.
14. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (press Yes).
15. To complete the setup process, press Finish on the Setup Complete dialog.
Installing: Workstation
16. Ensure that no other applications are running.
17. Locate the Wkinst sub-directory of the directory in which STATISTICA was installed on the server. Double-click on the Setup.exe file located in the Wkinst sub-directory.
18. The Welcome screen will appear. Press Next.
19. Read the software license agreement, and then press Yes if you agree with the terms and wish to continue the installation process.
20. To install to the default destination, click Next on the Select Destination Folder dialog. If you wish to install to a different destination, click Browse and select another destination, and then press Next.
21. Select the Components you would like to install in the Select Components dialog. You may deselect those items you do not wish to install at this time.
22. Select the option to create shortcuts in the Confirm Shortcuts dialog, and then press Next.
23. If you wish to change the program folder name, enter a new name in the Program Folders edit box. Otherwise, press Next on the Select Program Folder dialog.
24. If you are satisfied with all of your choices, press Next on the Start Copying Files dialog.
25. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (press Yes).
26. To complete the setup process, press Finish on the Setup Complete dialog.
27. You will see the STATISTICA program group window that will consist of STATISTICA Help, and the appropriate STATISTICA application shortcuts.
Un-installing
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the STATISTICA directory and all of its contents
StatSoft Home Page
Back to Top
STATISTICA Concurrent Network
System Administrator
Installation Instructions (version 5.5)
Server Installation
1. Ensure that no other applications are running.
2. Put the STATISTICA CD in the local drive (or shared drive). It should autorun the CD when you close the drive. If it does not autorun the CD, then go to the Windows Explorer and find the CD drive (e.g., STATISTICA (D:)). Find Setup.exe and double click on it.
3. The STATISTICA installation screen will appear. To begin installing, select Install STATISTICA.
4. The Welcome screen will appear. Press Next.
5. Enter the CD Key. You will find the key below the serial number on a sticker on the back of your CD case.
6. Enter the 5-digit Net ID (Network Identification Number). You will find the ID on a sticker below the CD key on the back of your CD case.
7. Read the software license agreement, and then press Yes if you agree with the terms and wish to continue the installation process.
8. Select or create the destination folder in the Browse for Folder dialog, and then press OK.
9. To install to the specified destination, click Next on the Select Destination Folder dialog. If you wish to install to a different destination, click Browse and select another destination, and then press Next.
10. Enter your Name, Company name, and the product Serial number in the User Information dialog. You will find the serial number on a sticker on the back of your CD case.
11. Select the Components you would like to install in the Select Components dialog. You may deselect those items you do not wish to install at this time. Click Next.
12. If you are satisfied with all of your choices, press Next on the Start Copying Files dialog.
13. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (press Yes).
14. Enter the License Key. You will find this key on a sticker on the back of your CD case. Click on the Next button.
15. You should receive a message indicating that the system has been successfully initialized. Click OK.
16. To complete the setup process, press Finish on the Setup Complete dialog.
18. Locate the Wkinst subfolder of the folder in which the STATISTICA program files were installed on the server. Double-click on the Setup.exe file located in the Wkinst subfolder.
19. The Welcome screen will appear. Press Next.
20. Read the software license agreement, and then press Yes if you agree with the terms and wish to continue the installation process.
21. To install to the default destination, click Next on the Select Destination Folder dialog. If you wish to install to a different destination, click Browse and select another destination, and then press Next.
22. Select the Components you would like to install in the Select Components dialog. You may deselect those items you do not wish to install at this time. Click Next.
23. Select the option to create shortcuts in the Confirm Shortcuts dialog, and then press Next.
24. If you wish to change the program folder name, enter a new name in the Program Folders edit box. Otherwise, press Next on the Select Program Folder dialog.
25. Select Administrator in the Select Program Folder Shortcut Options dialog. User shortcuts are appropriate for end users of the system. Administrator shortcuts are appropriate for the system administrator, providing links to system administration tools as well as the STATISTICA modules and help files. Click Next.
26. If you are satisfied with all of your choices, press Next on the Start Copying Files dialog.
27. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (press Yes).
28. If the workstation's system files need to be updated, you must restart your computer to finish the installation process. Press Finish on the Setup Complete dialog.
29. STATISTICA requires ms Data Access Components(2.0). If the workstation did not have MDAC 2.0 installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart your computer once more.
30. After the installation process has been completed, you will see the STATISTICA program group window that will consist of the appropriate STATISTICA application shortcuts.
31. Double-click on the Concurrent Network Login shortcut and log in using "Admin" as the user name and "abcdef" as the password. You may access the User Admin tool from the Component Manager. This tool allows a user with User Administrator permissions to create users of the system and assign permissions to them. Users must be assigned usernames and passwords before they will be able to logon to STATISTICA from their respective workstations. Create the appropriate users/groups before performing subsequent workstation installations on the remaining client machines.
Un-installing
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the folder containing the program files and all of its subfolders.
StatSoft Home Page
Back to Top
STATISTICA Concurrent Network User Installation Instructions (version 5.5)
Workstation Installation
1. Ensure that no other applications are running.
2. Locate the Wkinst subfolder of the folder in which the STATISTICA program files were installed on the server. Double-click on the Setup.exe file located in the Wkinst subfolder.
3. The Welcome screen will appear. Press Next.
4. Read the software license agreement, and then press Yes if you agree with the terms and wish to continue the installation process.
5. To install to the default destination, click Next on the Select Destination Folder dialog. If you wish to install to a different destination, click Browse and select another destination, and then press Next.
6. Select the Components you would like to install in the Select Components dialog. You may deselect those items you do not wish to install at this time. Click Next.
7. Select the option to create shortcuts in the Confirm Shortcuts dialog, and then press Next.
8. If you wish to change the program folder name, enter a new name in the Program Folders edit box. Otherwise, press Next on the Select Program Folder dialog.
9. Select User in the Select Program Folder Shortcut Options dialog. User shortcuts are appropriate for end users of the system. Click Next.
10. If you are satisfied with all of your choices, press Next on the Start Copying Files dialog.
11. Your system will be updated and program files will be installed. If you receive any Version Conflict messages, it is recommended that you keep your existing file (press Yes).
12. If the workstation's system files need to be updated, you must restart your computer to finish the installation process. Press Finish on the Setup Complete dialog.
13. STATISTICA requires ms Data Access Components(2.0). If the workstation did not have MDAC 2.0 installed, its setup process will be started when the computer restarts. To complete this setup process, you must restart your computer once more.
14. After the installation process has been completed, you will see the STATISTICA program group window that will consist of the appropriate STATISTICA application shortcuts.
15. Double-click on the STATISTICA shortcut (or any other program shortcut in the Program Group) and log in using the user name and password your were provided with by your STATISTICA System Administrator.
16. STATISTICA users have the option to save their username and password. If you choose Yes on the Login dialog shown below, you will not be prompted for your username and password when you attempt to access STATISTICA modules in the future.
Un-installing
To completely remove STATISTICA from each workstation, run the Add/Remove Program option found in the Windows Control Panel. To completely remove STATISTICA from the server, delete the folder containing the program files and all of its subfolders.
StatSoft Home Page
Back to Top
STATISTICA Neural Networks
Installation Instructions
(version 5.5)
Running Setup
When the CD-ROM is inserted, the STATISTICA installation screen will appear. To begin installing, select Install Additional (optional) Applications. The installation procedure discriminates between a single-user license and a network license of STATISTICA Neural Networks from the CD key entered.Single-User Installation
The setup program will locate the current installation of STATISTICA on your hard drive, if one exists. The default destination folder for STATISTICA Neural Networks is the folder to which STATISTICA is installed. If you wish to install it to a different folder, use the Browse button. If you do not have a copy of STATISTICA on your computer, select the destination folder to which you would like STATISTICA Neural Networks installed. Network Installation
The network installation of STATISTICA Neural Networks consists of two parts: a server installation and separate workstation installations.Un-installing
To completely remove STATISTICA Neural Networks from your computer (important if you intend to re-install the software), run the unInstallShield progrm provided in the STATISTICA Neural Networks group available from the Programs option of the Start menu.
Back to Top
Request Quote
StatSoft Home Page
![[StatSoft]](../images/sssmall.gif)
2300 East 14th Street, Tulsa, OK 74104
Phone: (918) 749-1119; Fax: (918) 749-2217
![[StatSoft]](../images/emailed.gif){kind=small}
e-mail: info@statsoft.com
StatSoft, StatSoft logo, STATISTICA, SEWSS, SEDAS, Data Miner, SEPATH and GTrees are trademarks of StatSoft, Inc.